- Scope of the Journal
- Manuscript Types
- ACS Researcher Resources
- Manuscript Preparation
- Preparing for Submission
- Production And Publication
Scope of the Journal
ACS Infectious Diseases is the first journal to highlight chemistry and its role in the multidisciplinary and collaborative field of infectious disease research. The scope of the journal encompasses all aspects of chemistry relating to infectious diseases research including research on pathogens, host-pathogen interactions, therapeutics, diagnostics, vaccines, drug-delivery systems, and other biomedical technology development pertaining to infectious diseases. We encourage submissions covering all pathogens, including bacteria, viruses, parasites and fungi. We also encourage submissions related to microbial toxins and prions.
With editors well-versed in both chemistry and the biology of infectious diseases, the journal aims to bridge the gap between these two disciplines. ACS Infectious Diseases welcomes submission of articles reporting investigations into chemistry and biology of infectious diseases, and encourages discussions centered on specific pathogen- and disease-related issues. Manuscripts dealing with epidemiological studies, or clinical case reports are outside the scope of ACS Infectious Diseases.
Topics covered by the journal include but are not limited to the following:
- Therapeutics. Use of target-, phenotypic-, or computational-based approaches for discovery and development of new agents to treat infectious diseases or to regulate the host-pathogen interaction, with an emphasis on establishing mechanism of action, understanding binding mode and inhibitory mechanism, and/or discussing pathogen-specific challenges to drug development. Development of new technologies to facilitate characterization, validation, and prioritization of potential drug targets or to assess the physicochemical bases for cellular penetration of anti-infectives. Chemistry-driven immunomodulatory therapeutics for mitigating infection associated inflammation. Host-directed antimicrobial therapeutics
- Diagnostics. Development of novel and improved diagnostics using physical, surface, analytical, and nano chemistry techniques. Use of structural biology, molecular biology, and chemical biology to investigate diagnostics targets.
- Anti-infective Biomaterials and Drug Delivery Systems. Novel biomaterials to mitigate infections. Use of novel materials and technologies, such as nanotechnologies, for delivery of antimicrobial agents.
- Drug Resistance. Mechanistic investigations of antimicrobial resistance.
- Pathogens and Host-Pathogen Interactions. Use of structural biology, chemical biology, glycobiology, physical chemistry, nucleic acid chemistry, and biochemistry to elucidate molecular mechanisms of pathogenesis. Development of tools to dissect mechanisms of pathogenesis. Mechanistic understanding of inflammation and infection interplay. Host-microbiome and pathogen interactions in context of infection, immunity, and inflammation.
- Vaccines. Discovery and development of synthetic vaccines and small molecule vaccine adjuvants. Structural, physical, or computational investigations of epitope binding.
Manuscript Types
ACS Infectious Diseases publishes original Articles, Featured Articles, Letters, Reviews, Perspectives, and Viewpoints that highlight recent developments and further the understanding of infectious diseases. The Editors welcome the submission of manuscripts in the following categories:
Articles
Concise, yet comprehensive, original research presenting an advance of immediate, broad, and lasting impact. Articles are not intended to be follow-up manuscripts, unless they contain new and extensive information that will advance the understanding of the system or biological process. Articles are peer-reviewed and contain an unreferenced abstract of 250 words or less. Abstracts should not contain abbreviations or acronyms unless essential. An introduction should expand on the background of the work and should not have a header. Articles include the following headed sections (presented in this order): Results and Discussion (can be combined), and Methods (after the conclusion or at the end of the manuscript if there is no conclusion). In general, Articles should be less than 6500 words in length and include 7–10 display items (figures/tables/schemes) and ~50 references. Supporting Information may be included. Articles include a graphical Table of Contents entry and a list of up to six keywords.
Featured Articles
The Editors may choose to give “Featured Article” status to any Article at the time of acceptance.
Letters
Short reports of original research focused on an individual significant finding. Letters are peer reviewed and begin with an unreferenced abstract of less than 150 words. Abstracts should not contain abbreviations or acronyms unless essential. Letters include unheaded sections for the Introduction and combined Results and Discussion and a headed section for Methods that can also contain subsections. Letters should contain 4–6 display items (figures/tables/schemes) and ~30 references. Letters should include sufficient experimental detail to allow others to reproduce the findings presented. Supporting Information is encouraged. Letters should be less than 4500 words in length, including the abstract, body text, methods, references, and figure/scheme legends. Letters include a graphical Table of Contents entry and a list of up to six keywords.
Reviews
Topical and of general interest to the readership. Reviews are peer-reviewed and contain an unreferenced abstract of 250 words or less, that summarizes the main points. Author should be a recognized expert in the field. A good Review critically evaluates existing work, provides a logical organization, and makes the material more easily available to those not expert in the area through clear text and figures. The manuscript should contain the following components: a brief introduction of the field such that the general reader can understand (and/or appreciate) the questions that have been the focus of the field in the past 1-3 years, the progress that has been made addressing these questions in recent publications, and a summary putting the recent progress into context for the field. The review should provide critical analysis of the topic, and insights about the challenges and future direction of the field. The scope of a Review should be broad enough that it is not dominated by the work of a single laboratory, and particularly not by the authors' own work. It should appeal to the wide readership of ACS Infectious Diseases (chemists, biochemists, molecular biologists, structural biologists & microbiologists). Reviews should be greater than 5000 words in length, include 4– 8 display items (figures/tables/schemes), and contain ~100 references. Include a graphical Table of Contents entry consisting of a colorful figure that represents the topic of the Review. Authors may choose to divide the Review into sections preceded by headings. Finally, the journal recommends that authors define key words used in the Review and key concepts in a separate paragraph. Potential authors are encouraged to write to the editor with a proposal/plan for the review.
Perspectives
Submitted by invitation only. Perspectives are designed to provide an enlightened appraisal of a field of research in which experts review the “state of the art” for a given topic similar to Reviews. Unlike Reviews, however, authors have editorial freedom to express their views on the strategic directions of the field of research. Perspectives should include a brief introduction of the field such that the general reader can understand (and/or appreciate) the questions that have been the focus of the field in the past 1-3 years, the progress that has been made addressing these questions in recent publications, and a summary putting the recent progress into context of the field and highlighting new questions that may arise or are now within reach in the next 1-3 years. It is best if the authors briefly put the field in perspective and discuss which questions can now be answered by the data in recent publications. The authors should provide a brief statement at the end of the Perspective about where the new data take us and what we should expect in the coming years in this area of research. The scope of a Perspective should be broad enough that it is not dominated by the work of a single laboratory, and particularly not by the authors' own work. It should appeal to the wide readership of ACS Infectious Diseases (chemists, biochemists, molecular biologists, structural biologists & microbiologists). Perspectives are peer-reviewed, contain an unreferenced abstract of 250 words or less, and include a graphical Table of Contents. Perspectives should be 3000–6000 words in length, include 3–6 display items (figures/tables/scheme), and contain up to 100 references. Authors may choose to divide the Perspective into sections preceded by headings. Finally, the journal recommends that authors define key words used in the Perspective and key concepts in a separate paragraph. We accept shorter forms of this manuscript type (“Miniperspective”) as long as they discuss emerging topics. Perspectives are submitted via a special link created in the author dashboard.
Viewpoints
Submitted by invitation only. Viewpoints are brief non-peer reviewed commentaries on current issues in the infectious diseases field, meant to call attention to a specific topic and encourage dialogue within the community. Responses to Viewpoints or other content will be considered. Viewpoint articles should be approximately 1500 words in length and contain a short abstract (100 words) to highlight the main point. Viewpoints can accommodate up to 2 smaller figures and/or tables. We strongly encourage the use of at least 1 figure. Please limit references to 8-12.
ACS Researcher Resources
While this document will provide basic information on how to prepare and submit the manuscript as well as other critical information about publishing, we also encourage authors to visit ACS Researcher Resources for additional information on everything that is needed to prepare (and review) manuscripts for ACS journals and partner journals, such as
- Mastering the Art of Scientific Publication, which shares editor tips about a variety of topics including making your paper scientifically effective, preparing excellent graphics, and writing cover letters.
- Resources on how to prepare and submit a manuscript to the ACS Publications manuscript submission and peer review system, including details on selecting the applicable Journal Publishing Agreement.
- Sharing your research with the public through the ACS Publications open access program.
- ACS Reviewer Lab, a free online course covering best practices for peer review and related ethical considerations.
- ACS Author Lab, a free online course that empowers authors to prepare and submit strong manuscripts, avoiding errors that could lead to delays in the publication process.
- ACS Inclusivity Style Guide, a guide that helps researchers communicate in ways that recognize and respect diversity in all its forms.
Manuscript Preparation
Submit with Fast Format
All ACS journals and partner journals have simplified their formatting requirements in favor of a streamlined and standardized format for an initial manuscript submission. Read more about the requirements and the benefits these serves authors and reviewers here.
Manuscripts submitted for initial consideration must adhere to these standards:
- Submissions must be complete with clearly identified standard sections used to report original research, free of annotations or highlights, and include all numbered and labeled components.
- Figures, charts, tables, schemes, and equations should be embedded in the text at the point of relevance. Separate graphics can be supplied later at revision, if necessary.
- When required by a journal's structure or length limitations, manuscript templates should be used.
- References can be provided in any style, but they must be complete, including titles. For information about the required components of different reference types, please refer to the ACS Style Quick Guide.
- Supporting Information must be submitted as a separate file(s).
Document Templates and Format
The templates facilitate the peer review process by allowing authors to place artwork and tables close to the point where they are discussed within the text. Learn more about document templates here.
General information on the preparation of manuscripts may also be found in the ACS Guide to Scholarly Communication.
Acceptable Software, File Designations, and TeX/LaTeX
See the list of Acceptable Software and appropriate File Designations to be sure your file types are compatible with the submission system. Information for manuscripts generated from TeX/LaTeX is also available.
Cover Letter
A cover letter must accompany every manuscript submission. During the submission process, you may type it or paste it into the submission system, or you may attach it as a file.
A cover letter must contain the following elements:
- Manuscript title
- Name of the corresponding author, with contact information
- Name(s) of all other author(s)
- Highlight of the manuscript, and its novelty and relevance in the field
- A paragraph explaining why the manuscript is appropriate for ACS Infectious Diseases
- Note whether the manuscript was discussed with an ACS Infectious Diseases Editor before submission
- Note any use of a preprint server, and as appropriate, state how the manuscript has been adjusted/updated between deposition and submission
- A short (~150 word) lay summary (at the level of an undergraduate in chemistry or biochemistry) describing the significance of the study for a broad audience
Manuscript Text Components
Title Page
Titles should clearly and concisely reflect the emphasis and content of the manuscript and be accessible to a broad audience. Titles are of great importance for current awareness and information retrieval and should be carefully constructed for these purposes. One option that authors may wish to consider is to present a significant outcome in the title. Titles should not contain specialized abbreviations or jargon. Editors may request author revision of a title at any time prior to publication.
Author List
Include all those who have made substantial contributions to the work. Refer to the Authorship, Author List, and Coauthor Notification section in the Appendix of these Guidelines for complete information.
Abstract
All Articles, Letters, Reviews, Perspectives, and Viewpoints must contain an abstract, which should provide a succinct, informative summation of the most important results and conclusions. Ideally, an abstract should be less than 150 words. References cannot be cited in the abstract. Abbreviations should be used sparingly and spelled out when first used. Abstracts display the same graphic provided for the TOC.
Keywords
Authors should provide a list of up to six keywords to be displayed below the abstract of their publication.
Introduction
The purpose and significance of the research should be clearly stated and placed in the context of earlier work in the area. Historical summaries are seldom warranted. Do not attempt a complete survey of the literature. If a recent article has summarized work on the subject, cite that article without repeating its individual citations. In general, the introductory section should be ~750 words for a letter and ~1000 words for an article. This section does not have a heading.
Results and Discussion
Results should be presented concisely. Tables and figures should be referred to directly, and data should be presented in only one figure or table. Figure captions (or table titles) must always accompany the respective figure (or table). In the interest of economy of space, Supporting Information (also subject to review) should be submitted as a separate file. The discussion should interpret the results, relate them to existing knowledge in the field, and clearly state their significance. To conserve space, please submit supplemental information as a single PDF as Supporting Information for Review. The Results and Discussion sections in Research Articles may be combined into a single section or described separately. Please use section headings.
Conclusion
Authors should write a brief conclusion that succinctly highlights the key findings of the manuscript and their significance.
Experimental Section
Provide a clear, unambiguous description of materials, methods, and equipment in sufficient detail to permit repetition of the work elsewhere. The section should be headed as “Materials and Methods” or “Methods”. Describe novel experimental procedures in detail but refer to published procedures by literature citation of both the original and any published modifications. Authors must emphasize any unexpected, new, and/or significant hazards or risks associated with the reported work. This information should be in the experimental details section of the full article or communication. Experimental Manuscripts reporting data from experiments on live animals must include a statement identifying the approving committee and certifying that such experiments were performed in accordance with all national or local guidelines and regulations.
Acknowledgment
Authors may acknowledge people, organizations, and financial supporters in this section.
Abbreviations Used
Provide a list of nonstandard abbreviations and acronyms used in the manuscript, e.g., "Mtb, Mycobacterium tuberculosis". Separate by semicolons. Do not include compound code numbers in this list. It is not necessary to include abbreviations and acronyms from the Standard Abbreviations and Acronyms list in the ACS Guide to Scholarly Communication or those accepted by the Journal of Medicinal Chemistry (http://pubs.acs.org/paragonplus/submission/jmcmar/jmcmar_abbreviations.pdf).
References and Notes
Number literature references and notes in one consecutive series by order of mention in the text. The accuracy of the references is the responsibility of the author. Compile all references together in a list at the end of the manuscript text. Authors must also cite any previously published work wherein portions of the submitted work have been disclosed. Literature references must be numbered with Arabic numerals in the order of their first citation in the text and the corresponding numbers inserted at the appropriate locations in the text. Titles of journals are abbreviated according to Chemical Abstracts Service Source Index (CASSI). Manuscripts accepted for publication are cited as “in press”; the DOI should be given if the article is published online. Cite manuscripts that are in preparation or have been submitted but not yet accepted as unpublished experiments or personal communications. Authors should consult The ACS Guide to Scholarly Communication for the appropriate style to use in citations of journal articles, books, and other publications.
Supporting Information
This information is provided to the reviewers during the peer-review process (for Review Only) and is available to readers of the published work (for Publication). Supporting Information must be submitted at the same time as the manuscript. See the list of Acceptable Software by File Designation and confirm that your Supporting Information is viewable.
If the manuscript is accompanied by any supporting information files for publication, these files will be made available free of charge to readers. A brief, nonsentence description of the actual contents of each file, including the file type extension, is required. This description should be labeled Supporting Information and should appear before the Acknowledgement and Reference sections. Examples of sufficient and insufficient descriptions are as follows:
Examples of sufficient descriptions: “Supporting Information: 1H NMR spectra for all compounds (PDF)” or “Additional experimental details, materials, and methods, including photographs of experimental setup (DOC)”.
Examples of insufficient descriptions: “Supporting Information: Figures S1-S3” or “Additional figures as mentioned in the text”.
When including supporting information for review only, include copies of references that are unpublished or in-press. These files are available only to editors and reviewers.
Research Data Policy
All ACS journals strongly encourage authors to make the research data underlying their articles publicly available at the time of publication.
Research data is defined as materials and information used in the experiments that enable the validation of the conclusions drawn in the article, including primary data produced by the authors for the study being reported, secondary data reused or analyzed by the authors for the study, and any other materials necessary to reproduce or replicate the results.
The ACS Research Data Policy provides additional information on Data Availability Statements, Data Citation, and Data Repositories.
Data Requirements
ACS Math Style
Authors including math, display or in-text, in their manuscripts are encouraged to consult the ACS Guidelines for Presenting Mathematical Information. This style sheet provides brief discussion of formatting related to the presentation of mathematical formulas, complete with examples of ACS style and layout. This document was developed to help authors anticipate how mathematical expressions will be formatted in the published version of the article.
Data Presentation
Data should be presented in a way that makes interpretation clear to the reader.
For more information on data presentation, see:
- Quantifying the Interactions between Biomolecules: Guidelines for Assay Design and Data Analysis
- Beyond Bar and Line Graphs: Time for a New Data Presentation Paradigm
Purity of Tested Compounds
Disclosure of structure and/or composition, with adequate characterization is essential for manuscripts which report antimicrobial activity. Knowledge of the purity of compounds employed in biological studies, whether they are synthesized, purchased, or received as gifts, is a crucial factor for obtaining reliable and reproducible results. For studies reported in ACS Infectious Diseases, it is required that assayed compounds be at least 95% pure. The analytical methods used for compound characterization and purity assessment should be described in the Methods section.
- Methods: All scientifically established methods to evaluate purity (e.g., HPLC, combustion analysis, absolute quantitative 1H NMR, qHNMR) are acceptable. If the target compounds are solvated, the quantity of solvent should be included in the compound formulas. No documentation is required with the exception of qHNMR (see Purity by Absolute qNMR instructions).
- Purity Percentage: All tested compounds, whether synthesized or purchased, should possess a purity of at least 95%. Compound purities less than 95% may be accepted on a case-by-case basis at the editor's discretion if appropriate documentation is provided on the present impurities.
- Elemental analysis: Found values for carbon, hydrogen, and nitrogen (if present) should be within 0.5% of the calculated values for the proposed formula.
- Statements/Documentation: Include the specific analytical method used to determine purity in the general part of the experimental section together with a statement confirming purity. If the purity of a particular compound is less than 95%, specify the percentage of purity at the end of the description of its synthesis in the experimental section.
Interference Compounds
Active compounds from any source must be examined for known classes of assay interference compounds and this analysis must be provided in the General Experimental section (see this Editorial in ACS Infectious Diseases on the Ecstasy and Agony of Assay Interference Compounds). Compounds shown to display misleading assay readouts by a variety of mechanisms include, but are not limited to, aggregation, redox activity, fluorescence, protein reactivity, singlet-oxygen quenching, the presence of impurities, membrane disruption, and their decomposition in assay buffer to form reactive compounds. Provide firm experimental evidence in at least two different assays that reported compounds with potential liability are specifically active and their apparent activity is not an artifact. The most common artifact in assays is due to colloidal aggregation, which can be evaluated by several methods as described in the above cited Editorial.
Compound Characterization
The knowledge of the structure and purity of compounds employed in biological studies, whether they are synthesized, purchased, or received as gifts, is a crucial factor for obtaining reliable and reproducible results. For studies reported in ACS Infectious Diseases, it is recommended to refer to the Compound Characterization requirements in the Organic Chemistry ACS Research Data Guidelines for comprehensive instructions. Reviewers will assess the overall thoroughness of the characterization of synthesized compounds using these guidelines.
Computational Chemistry
When computational chemistry is a major component of a study, manuscripts must fall into one or more of the following categories. It is encouraged to include experimental validation of theoretical aspects.
- Practical applications of computational methods including experimental data, in particular, experimental validation of computational predictions.
- Substantially novel methods along with evidence for utility in medicinal chemistry and drug design and significant potential for advancing the field, with methods that must be described clearly and comprehensibly.
- Computational, statistical, or other theoretical analyses of currently available data that provide unexpected or provocative insights into topical problems and advance medicinal chemistry knowledge.
When manuscripts combine computational and experimental studies, both components must be significant. For example, computational analyses are not automatically validated by the addition of a minor experimental component. For manuscripts reporting virtual screening results, purity data should conform to journal purity requirements for all experimentally tested active compounds, and convincing experimental data should be provided that demonstrate true biological activity of identified hits. For manuscripts describing new methods, the scope of the method must be validated convincingly.
Sufficient information should be presented to allow the method to be reproduced and tested in other laboratories. All experimental data and molecular structures used to generate and/or validate computational models must be reported in the manuscript or Supporting Information or be readily available without infringements or restrictions.
Biological Data
Biological test methods must be referenced or described in sufficient detail (in the main text or preferably in the Supporting Information) to permit the experiments to be repeated by others. The methods used should be relevant to the purpose of the study. Authors should be cognizant of significant figures for their measurements when reporting biological data. A statement regarding inherent error, such as standard deviation, standard error of the mean (SEM), or the like, should be provided. The error limits themselves need not be presented in the main text but can appear in the Supporting Information. The number of experiments for a given data point (e.g., N = 3) should be indicated in some manner. In vivo biological data should be accompanied by statistical limits (statistical significance). Doses and concentrations should be expressed as molar quantities (e.g., mol/kg, nM) whenever possible. Exceptions include antibiotic concentrations for which µg/mL has traditionally been used. For further information regarding the use of biological specimens including antibodies, cell lines and microorganisms, human subjects, animal subjects, and biological assays, refer here.
Statistical Criteria
Appropriate statistical assessment is equally important for experimental and computational studies in medicinal chemistry. Reported results generally require statistical validation. The term "significant" should not be used unless the appropriate statistical analysis was performed and the probability value (p-value) used to identify significance (generally p<0.05) is consistent with the scientific rigor of the field. Statistical analyses of compound data are also frequently presented, which must adhere to acceptable statistical and scientific standards.
The following points should be considered:
- A clear and comprehensive description of experimental data or computed data underlying the analysis is required.
- Appropriate statistical tests must be used for given data sets and attention should be given to data that are not normally distributed. In these cases, the appropriate non-parametric test should be used.
- Statistical methods used must be clearly identified, including whether they were one- or two-tailed. Non-standard statistical methods should be described in detail or precisely referenced.
- Underlying assumptions of statistical methods should be specified. For example, many statistical tests assume the presence of normal data distributions, which is often an approximation.
- Depending on the type of data, either confidence limits (CL), standard deviations (SD), or standard errors of the mean (SEM) must accompany a mean value provided in either graphical or tabular form. The experimental section for each assay performed should indicate the number of replicates and independent experiments as well as the statistical method used for data analysis. For example, assay curves must contain errors bars derived from multiple measurements.
- For regression curves, uncertainty must be assessed by plotting original data along the curve or by establishing experimental or calculation confidence limits.
- If average values are reported from computational analysis, their variance must be documented. This can be accomplished by providing the number of times calculations have been repeated, mean values, and standard deviations (or standard errors). Alternatively, median values and percentile ranges can be provided. Data might also be summarized in scatter plots or box plots.
- Reporting averages of data assigned to pre-defined value ranges and ‘averages of average values’ must be avoided.
- Provide exact p values regardless of overall significance.
Kinetic and Equilibrium Data
Authors are referred to the STRENDA (Standards for Reporting Enzymology Data) Commission of the Beilstein Institut (www.beilstein-strenda-db.org/strenda/) for detailed guidelines on how this data should be organized and formatted. For publication in ACS Infectious Diseases, reporting of kinetic data and equilibrium binding data for proteins, nucleic acids, and other species must include a description of the identity of the catalyst or binding molecule, its origin, purity of composition, and any modifications such as mutations, posttranslational modifications, or any other modifications made to facilitate expression and purification. The assay method and the exact experimental assay conditions must be provided as a reference to previous work, with or without modifications, or fully described if a new assay. Conditions essential to reproduce the results such as the temperature, pH, and pressure (if other than atmospheric) of the assay should be included. Terms such as “not detectable” (ND) should be avoided. Instead, an estimate of the limit of detection based on the sensitivity and error analysis of the assay should be provided.
Structural Data
The atomic coordinates and related experimental data (structure factor amplitudes/intensities and/or NMR restraints) associated with a structure reported in ACS Infectious Diseases must be deposited at a member site of the Worldwide Protein Data Bank (www.wwpdb.org): RCSB PDB (www.pdb.org), PDBe (www.ebi.ac.uk/pdbe), PDBj (www.pdbj.org), or BMRB (www.bmrb.wisc.edu). The PDB ID should be included in the manuscript. Authors must agree to release the atomic coordinates and experimental data when the associated article is published. Questions relating to depositions should be sent to deposit@wwpdb.org. A manuscript will be accepted only after receipt from the submitting author of a written statement that the coordinates have been deposited. Coordinates must be released immediately upon publication. Refer to the NMR Guidelines for ACS Journals for more information.
Manuscripts that report X-ray crystallographic structures should include a table of data statistics that contains the number of reflections, data cutoff (e.g., F > 0), Rwork/Rfree, I/σ(I), percent completeness, redundancy, Rmerge, number of atoms per asymmetric unit, and B-factors for protein, waters, and ligands/ions. For manuscripts that involve NMR studies in which complete or nearly complete resonance assignments of biopolymers have been carried out, authors are required to deposit relevant NMR assignments and related experimental data at the BioMagResBank (BMRB; Biological Magnetic Resonance Bank). These data may include assigned chemical shifts, coupling constants, relaxation parameters (T1, T2, and NOE values), dipolar couplings, or other data accepted by BMRB. The author is responsible for obtaining a BMRB entry accession number (e.g., 4248), which should appear in a data deposition paragraph. The data must be released upon publication.
Crystallographic data on nucleosides, nucleotides, and other small molecules should be submitted upon publication to the Cambridge Structural Database. Crystal structures of nucleic acids should be deposited with the Nucleic Acid Database (NDB) at Nucleic Acid Database (NDB) or with the RCSB PDB at RCSB Protein Data Bank - RCSB PDB.
For manuscripts describing structures of biological macromolecules from electron microscopy experiments, the 3D map should be deposited at either the Protein Data Bank in Europe (UK) or RCSB (USA) EMDB deposition site. Once the map has been deposited, any fitted atomic coordinates should be deposited with the Protein Data Bank (PDB) by following the link provided from the EMDB deposition session. The EMDB and PDB IDs should be included in the manuscript. Both the map and the coordinate data will be made public when the associated article is published. Methods for Motion Correction and CTF estimation during image analysis and details of the process used for initial model generation should be provided. Authors should also provide the commands used to generate Masks for postprocessing of refined maps. Both the non-post-processed final maps and the corresponding sharpened maps should be submitted to the appropriate database.
Manuscripts dealing with the development of structures from sequence homology are generally not considered unless significant experimental tests of the model also are presented.
Database Deposition
Sequence Data
Authors should refer to the Biological Data Guidelines for information on submitting sequence data to the appropriate public repository.
Crystal and NMR Structures Structural Data
Small molecular crystallographic data should be submitted upon publication to the Cambridge Structural Database. Manuscripts reporting macromolecular NMR or crystal structures must specifically state that the atomic coordinates have been deposited in the Protein Data Bank (PDB) or the Nucleic Acid Knowledgebase and must list the accession code(s). These coordinates must be designated “for immediate release upon publication”. Authors of manuscripts reporting X-ray crystal structures are encouraged to deposit the structure factor files in the PDB. No formal requirement exists for deposition of NMR assignments and constraints (see the Biological Magnetic Resonance Data Bank).
- Biomolecule Structures: NMR Studies of Biopolymers: Deposition of relevant NMR assignments and related experimental data at the BioMagResBank is required. The author is responsible for obtaining a BMRB entry accession number, which should appear in a data deposition paragraph. The data must be released upon publication.
- Biological Macromolecules from Electron Microscopy Experiments: Density maps should be deposited at either the Protein Data Bank in Europe or RCSB EMDB deposition site. Once the map has been deposited, any fitted atomic coordinates should be deposited with the Protein Data Bank (PDB) by following the link provided from the EMDB deposition session. The EMDB and PDB IDs should be included in the manuscript. Both the map and the coordinate data will be made public when the associated article is published.
- Structures from Sequence Homology: Manuscripts dealing with the development of structures from sequence homology are generally not considered unless significant experimental tests of the model also are presented.
Electron Microscopy Data
No formal requirement exists for deposition of molecular envelope reconstruction from electron microscopy data, but the journal encourages authors to deposit relevant information in appropriate databases. Approved databases for deposition of electron microscopy data are the Worldwide Protein Data Bank, the Protein Data Bank Japan, or the Protein Databank in Europe (PDBe).
Microarray Data
Data must be submitted to the Genome Expression Omnibus (GEO) or ArrayExpress databases and the relevant accession numbers included in the published manuscript. Please reference the Microarray Gene Expression Data (MGED) open letter specifying microarray standards.
Genetically Modified Organisms and Mutants
Use established repositories such as the Jackson Laboratory, the Mutant Mouse Regional Resource Center, the American Type Culture Collection, the UK Stem Cell Bank, or another public storage area whenever possible. Large datasets for which an approved database has not yet been established must be housed as online Supporting Information on the journal’s website.
Material and Data Availability
ACS Infectious Diseases understands that communication and collaboration between chemists and biologists are significantly enhanced when materials and data can be exchanged among scientists. Therefore, a condition of publication is that authors are required to make materials, data, and protocols available to readers through deposition in a publicly used database. Hosting on an author’s website is not an acceptable substitute. Authors also agree to make available to interested academic researchers for their own use any materials reported in their manuscript that are not otherwise obtainable. Any restrictions to the availability of materials or information must be stated at the time of submission.
Language and Editing Services
A well-written paper helps share your results most clearly. ACS Publications’ English Editing Service is designed to help scientists communicate their research effectively. Our subject-matter expert editors will edit your manuscript for grammar, spelling, and other language errors so your ideas are presented at their best.
Preparing Graphics
The quality of illustrations in ACS journals and partner journals depends on the quality of the original files provided by the authors. Figures are not modified or enhanced by journal production staff. All graphics must be prepared and submitted in digital format.
Graphics should be inserted into the main body whenever possible. Please see Appendix 2 for additional information.
Any graphic (figure chart, scheme, or equation) that has appeared in an earlier publication should include a credit line citing the original source. Authors are responsible for obtaining written permission to re-use this material.
Figure and Illustration Services
The impact of your research is not limited to what you can express with words. Tables and figures such as graphs, photographs, illustrations, diagrams, and other visuals can play a significant role in effectively communicating your findings. Our Artwork Editing and Graphical Abstract services generate publication-ready figures and Table of Contents (TOC) graphics that conform to your chosen journal’s specifications. For figures, this includes changes to file type, resolution, color space, font, scale, line weights, and layout (to improve readability and professional appearance). For TOC graphics, our illustrators can work with a rough sketch or concept or help extract the key findings of your manuscript directly for use as a visual summary of your paper.
Preparing for Submission
Manuscripts, graphics, supporting information, and required forms, as well as manuscript revisions, must all be submitted in digital format through ACS Publishing Center, which requires an ACS ID to log in. Registering for an ACS ID is fast, free, and does not require an ACS membership. Please refer to Appendix 1 for additional information on preparing your submission
Prior Publication Policy
ACS Infectious Diseases authors are allowed to deposit an initial draft of their manuscript in the following preprint servers: ChemRxiv, arXiv, or bioRxiv. A patent or a published patent application is not considered to be a prior "publication". Please note any use of a preprint server, patents, and dissertations in the cover letter, and as appropriate, state how the manuscript has been adjusted/updated between deposition and submission. All other prior/redundant publications are forbidden. Upon publication in ACS Infectious Diseases, authors are advised to add a link from the preprint to the published article via the Digital Object Identifier (DOI). For further questions, contact the Editorial Office. For the ACS Publications policy on theses and dissertations, click here.
Editorial Policies
Costs
ACS Infectious Diseases does not impose any submission or publication fees, unless authors choose to publish via an open access option. See the Open Access Compliance section for more details.
Nomenclature
Use abbreviations and acronyms sparingly, and all usage should be defined at the first occurrence in the text. Whenever possible, use systematic nomenclature as recommended by IUPAC and IUBMB for chemical compounds and biomolecules. It is acceptable to use semisynthetic or generic names for certain specialized classes of compounds, such as steroids, peptides, carbohydrates, etc. In such a case, the name should conform to the generally accepted nomenclature conventions for the compound class. Chemical names for drugs are preferred. If these are not practical, generic names, or names approved by the U.S. Adopted Names Council or by the World Health Organization, may be used. Names of organisms should comply with genetic conventions, with genus and species names written in italics and spelled out in full on first appearance. Gene symbols should conform to approved nomenclature and should be italicized, whereas corresponding protein products should start with a capital letter and should not be italicized. Consult the available nomenclature databases (e.g., Entrez Gene) for correct names and symbols. Enzyme names should be accompanied by their Enzyme Commission numbers.
Compound Code Names. Code numbers assigned to a compound may be used as follows:
- Once in the manuscript title, when placed in parentheses AFTER the chemical or descriptive name.
- Once in the abstract.
- Once in the text (includes legends) and once to label a structure. Code numbers in the text must correspond to structures or, if used only once, the chemical name must be provided before the parenthesized code number, e.g., “chemical name (CCA-006).” If appearing a second time in the text, a bold Arabic number must be assigned on first usage, followed by the parenthesized code number, e.g., “1 (CCA-006).” Subsequently, only the bold Arabic number may be used. All code numbers in the text must have a citation to a publication or a patent on first appearance.
Compounds widely employed as research tools and recognized primarily by code numbers may be designated in the manuscript by code numbers without the above restrictions. Their chemical name or structure should be provided as above. Editors have the discretion of determining which code numbers are considered widely employed.
Trademark Names
Trademark names for reagents or drugs must be used only in the experimental section. Perspectives may use trademark names once in the manuscript.
Providing Potential Reviewer Names
Please suggest 5 reviewers. Authors are encouraged to avoid suggesting reviewers from the authors’ institutions. Do not suggest reviewers who may have a real or perceived conflict of interest. Whenever possible, suggest academic email addresses rather than personal email addresses.
Manuscript Transfer
If your submission is declined for publication by this journal, the editors might deem your work to be better suited for another ACS Publications journal or partner journal and suggest that the authors consider transferring the submission. Manuscript Transfer simplifies and shortens the process of submitting to another ACS journal or partner journal, as all the coauthors, suggested reviewers, manuscript files, and responses to submission questions are copied to the new draft submission. Authors are free to accept or decline the transfer offer.
Note that each journal is editorially independent. Transferring a manuscript is not a guarantee that the manuscript will be accepted, as the final publication decision will belong to the editor of the next journal.
PRODUCTION AND PUBLICATION
Proofs via ACS Direct Correct
Correction of the galley proofs is the responsibility of the Corresponding Author. The Corresponding Author of an accepted manuscript will receive e-mail notification and complete instructions when page proofs are available for review via ACS Direct Correct. Extensive or important changes on page proofs, including changes to the title or list of authors, are subject to review by the editor.
It is the responsibility of the Corresponding Author to ensure that all authors listed on the manuscript agree with the changes made on the proofs. Galley proofs should be returned within 48 hours in order to ensure timely publication of the manuscript.
Publication Date and Patent Dates
Accepted manuscripts will be published on the ACS Publications Web site as soon as page proofs are corrected and all author concerns are resolved. The first date on which the document is published on the Web is considered the publication date.
Publication of manuscripts on the Web may occur weeks in advance of the cover date of the issue of publication. Authors should take this into account when planning their patent and intellectual property activities related to a document and should ensure that all patent information is available at the time of first publication, whether ASAP or issue publication.
All articles published ahead of print receive a unique Digital Object Identifier (DOI) number, which is used to cite the manuscript before and after the paper appears in an issue. Additionally, any supplemental information submitted along with the manuscript will automatically be assigned a DOI and hosted on Figshare to promote open data discoverability and use of your research outputs.
ASAP Publication
Manuscripts will be published on the “ASAP Articles” page on the web as soon as page proofs are corrected and all author concerns are resolved. ASAP publication usually occurs within a few working days of receipt of page proof corrections, which can be several weeks in advance of the cover date of the issue.
Post-Publication Policies
The American Chemical Society follows guidance from the Committee on Publication Ethics (COPE) when considering any ethical concerns regarding a published article, Retractions, and Expressions of Concern.
Additions and Corrections
Additions and Corrections may be requested by the author(s) or initiated by the Editor to address important issues or correct errors and omissions of consequence that arise after publication of an article. All Additions and Corrections are subject to approval by the Editor, and should bring new and directly relevant information and corrections that fix scientific facts. Minor corrections and additions will not be published. Readers who detect errors of consequence in the work of others should contact the corresponding author of that work.
Additions and Corrections must be submitted as new manuscripts via the ACS Publishing Center by the Corresponding Author for publication in the “Addition/Correction” section of the Journal. The corresponding author should obtain approval from all coauthors prior to submitting or provide evidence that such approval has been solicited. The manuscript should include the original article title and author list, citation including DOI, and details of the correction.
Retractions
Articles may be retracted for scientific or ethical reasons and may be requested by the article author(s) or by the journal Editor(s), but are ultimately published at the discretion of the Editor. Articles that contain seriously flawed or erroneous data such that their findings and conclusions cannot be relied upon may be retracted in order to correct the scientific record. When an article is retracted, a notice of Retraction will be published containing information about the reason for the Retraction. The originally published article will remain online except in extraordinary circumstances (e.g. where deemed legally necessary, or if the availability of the published content poses public health risks).
Expressions of Concern
Expressions of Concern may be issued at the discretion of the Editor if:
- there is inconclusive evidence of research or publication misconduct by the authors;
- there is evidence that the findings are unreliable but the authors’ institution will not investigate the case;
- an investigation into alleged misconduct related to the publication either has not been, or would not be, fair and impartial or conclusive;
- an investigation is underway but a judgment will not be available for a considerable time.
Upon completion of any related investigation, and when a final determination is made about the outcome of the article, the Expression of Concern may be replaced with a Retraction notice or Correction.
Sharing Your Published Article
At ACS Publications, we know it is important for you to be able to share your peer reviewed, published work with colleagues in the global community of scientists. As sharing on sites known as scholarly collaboration networks (SCNs) is becoming increasingly prevalent in today’s scholarly research ecosystem, we would like to remind you of the many ways in which you, a valued ACS author, can share your published work.
Publishing open access makes it easy to share your work with friends, colleagues, and family members. In addition, ACS Publications makes it easy to share your newly published research with ACS Articles on Request (see below). Don’t forget to promote your research and related data on social media, at conferences, and through scholarly communication networks. Increase the impact of your research using the following resources: Altmetrics, Figshare, ACS Certified Deposit
E-Prints
When your article is published in an ACS journal or partner journal, corresponding authors are provided with a link that offers up to 50 free digital prints of the final published work. This link is valid for the first 12 months following online publication, and can be shared via email or an author’s website. After one year, the access restrictions to your article will be lifted, and you can share the Articles on Request URL on social media and other channels. To access all your Articles on Request links, log in to your ACS Researcher Resources account and visit the “My Published Manuscripts” page.
Reprints
Article, journal, and commercial reprints are available to order.
Appendix 1: PREPARING FOR SUBMISSION
We’ve developed ACS’ publishing and editorial policies in consultation with the research communities that we serve, including authors and librarians. Browse our policies below to learn more.
Ethical Guidelines
ACS editors have provided Ethical Guidelines for persons engaged in the publication of chemical research—specifically, for editors, authors, and reviewers. Each journal also has a specific policy on prior publication.
OFAC Compliance
As a U.S.-based non-profit organization, the American Chemical Society (ACS) is required to comply with U.S. sanctions laws and regulations administered by the U.S. Treasury Department’s Office of Foreign Assets Control (OFAC). While these laws and regulations permit U.S.-based publishers like ACS to engage in publishing-related activities with authors located in sanctioned regions in many cases, ACS may be prohibited under U.S. law from engaging in publishing-related activities in some cases, including, but not limited to, instances where an author or the institution with which an author is affiliated is located in a particular sanctioned region or has been designated by OFAC as a Specially Designated National (SDN) pursuant to certain U.S. sanctions programs. ACS reserves the right to refrain from engaging in any publishing-related activities that ACS determines in its sole discretion may be in violation of U.S. law.
Safety Considerations
Authors must emphasize any unexpected, new, and/or significant hazards or risks associated with the reported work. This information should be in the Experimental Section of a full article and included in the main text of a letter. Statement examples can be found in the Safety Statement Style Sheet and additional information on communicating safety information from the ACS Guide to Scholarly Communication is freely available here.
Conflict of Interest Disclosure
A statement describing any financial conflicts of interest or lack thereof is published in each ACS journal and partner journal article.
During the submission process, the Corresponding Author must provide a statement on behalf of all authors of the manuscript, describing all potential sources of bias, including affiliations, funding sources, and financial or management relationships, that may constitute conflicts of interest. If the manuscript is accepted, the statement will be published in the final article.
If the manuscript is accepted and no conflict of interest has been declared, the following statement will be published in the final article: “The authors declare no competing financial interest.”
Plagiarism
In publishing only original research, ACS is committed to deterring plagiarism, including self-plagiarism. ACS Publications uses CrossCheck's iThenticate software to screen submitted manuscripts for similarity to published material. Note that your manuscript may be screened during the submission process.
Further information about plagiarism can be found in Part B of the Ethical Guidelines to Publication of Chemical Research. See also the press release regarding ACS' participation in the CrossCheck initiative.
Authorship, Author List, and Coauthor Notification
Authors are required to obtain the consent of all their coauthors prior to submitting a manuscript. The submitting author accepts the responsibility of notifying all coauthors that the manuscript is being submitted.
During manuscript submission, the submitting author must provide contact information (full name, email address, institutional affiliation, and mailing address) for all of the coauthors. Because all of the author names are automatically imported into the electronic Journal Publishing Agreement, the names must be entered into the submission system. (Note that coauthors are not required to register in the ACS Publishing Center.) Author affiliation should reflect where the work was completed, even if the author has since left that institution. Authors may include a note with a current address if their institution has changed since the work was completed.
To expedite the processing of your manuscript, please format your author and affiliation information according the guidelines in this document.
Criteria for authorship can be found in Part B of the Ethical Guidelines to Publication of Chemical Research. Artificial intelligence (AI) tools do not qualify for authorship. The use of AI tools for text or image generation should be disclosed in the manuscript within the Acknowledgment section with a description of when and how the tools were used. For more substantial use cases or descriptions of AI tool use, authors should provide full details within the Methods or other appropriate section of the manuscript.
If any change in authorship is necessary after a manuscript has been submitted, confirmation is required that all of the authors (including those being added or removed) have been notified and have agreed to the change. To provide this confirmation, authors are asked to complete and sign an authorship change form and provide the completed form to the appropriate editorial office.
Authors with a single name: If you, or any of your coauthors, have only one name, please follow these steps for proper submission to the ACS Publishing Center:
- First (Given) Name Field: Enter an asterisk (*) into the "First (Given) Name" field.
- Last (Family) Name Field: Enter your single name into the "Last (Family) Name" field.
If your paper is accepted, the asterisk (*) will be removed from the published version of the paper.
Patent Activities and Intellectual Property
Authors are responsible for ensuring that all patent activities and intellectual property issues are satisfactorily resolved prior to first publication (ASAP or in issue). Acceptance and publication will not be delayed for pending or unresolved issues of this nature.
Open Researcher and Contributor ID (ORCID)
Authors submitting manuscript revisions are required to provide their own personal, validated ORCID iD before completing the submission, if an ORCID iD is not already associated with their ACS Publishing Center user profiles. This ID may be provided during original manuscript submission or when submitting the manuscript revision. All authors are strongly encouraged to register for an ORCID iD, a unique researcher identifier. The ORCID iD will be displayed in the published article for any author on a manuscript who has a validated ORCID iD associated with ACS when the manuscript is accepted.
ORCID iDs should not be typed into the manuscript. ACS publishes only those ORCID iDs that have been properly verified and linked before the manuscript is accepted. After your ORCID iD is linked, it will be displayed automatically in all subsequently accepted manuscripts for any/all ACS journals. We do not publish ORCID iDs provided during proof review or via other communications after a manuscript is accepted for publication.
With an ORCID iD, you can create a profile of your research activities to distinguish yourself from other researchers with similar names, and make it easier for your colleagues to find your publications. If you do not yet have an ORCID iD, or you wish to associate your existing ORCID iD with your ACS Publishing Center account, you may do so by clicking on “Profile” from your ACS Publishing Center dashboard and following the ORCID-related links. Learn more at www.orcid.org.
Copyright and Permissions
To obtain forms and guidelines for completing the Journal Publishing Agreement or obtaining permissions from copyright owners, and to explore a Copyright Learning Module for chemists, click here.
Funder Reporting Requirement
Authors are required to report funding sources and grant/award numbers. Enter ALL sources of funding for ALL authors in BOTH the Funder Registry Tool in the submission system and in your manuscript to meet this requirement.
Open Access Compliance
ACS offers options by which authors can fulfill the requirements for open access and deposition into repositories for funded research. Visit our ACS Open Science site to see how to fulfill requirements for specific funders and to find out if you are eligible to publish under a Read + Publish agreement between ACS and your institution. You can also find out more about Open Access Compliance and ACS Open Science initiatives.
Diversity and Inclusion Statement
During manuscript submission, ACS journal authors have the option to submit a statement sharing information related to diversity and inclusion that is relevant for their paper. If supplying a diversity and inclusion statement, the corresponding author must provide this on behalf of all authors of the manuscript during the submission process. These statements include but are not limited to analysis of citation diversity and acknowledgment of indigenous land on which research was conducted. Statements expressing political beliefs are not permitted and may be removed by the journal office. All statements are subject to final review by the Editor.
- Citation Diversity Statement:The citation diversity statement should appear in the Acknowledgements section of the manuscript. ACS recommends including the following: (1) the importance of citation diversity, (2) the proportion of citations by gender and race/ethnicity for the first and last authors, (3) the method used to determine those proportions and its limitations, and (4) steps taken to by the authors to improve citation diversity in the article. We recognize that one limitation of the current methods is that it cannot account for intersex, non-binary, and transgender people, or Indigenous and mixed-race authors. (Adapted from BMES/Springer Guidelines)
- Land acknowledgment:The land acknowledgment statement should appear in the Acknowledgements section of the manuscript. The statement should link to the institutions’ formal land acknowledgments on which the research took place, if possible. Further guidance for creating these statements can be found here: https://nativegov.org/news/a-guide-to-indigenous-land-acknowledgment/.
Appendix 2: Preparing Graphics
Resolution
Digital graphics pasted into manuscripts should have the following minimum resolutions:
- Black and white line art, 1200 dpi
- Grayscale art, 600 dpi
- Color art, 300 dpi
Size
Graphics must fit a one- or two-column format. Single-column graphics can be sized up to 240 points wide (3.33 in.) and double-column graphics must be sized between 300 and 504 points (4.167 in. and 7 in.). The maximum depth for all graphics is 660 points (9.167 in.) including the caption (allow 12 pts. For each line of caption text). Lettering should be no smaller than 4.5 points in the final published format. The text should be legible when the graphic is viewed full-size. Helvetica or Arial fonts work well for lettering. Lines should be no thinner than 0.5 point.
Color
Color may be used to enhance the clarity of complex structures, figures, spectra, and schemes, etc., and color reproduction of graphics is provided at no additional cost to the author. Graphics intended to appear in black and white or grayscale should not be submitted in color.
Type of Graphics
Table of Contents (TOC)/Abstract Graphic
Consult the Guidelines for Table of Contents/Abstract Graphics for specifications.
Our team of subject-matter experts and graphical designers can also help generate a compelling TOC graphic to convey your key findings. Learn more about our Graphical Abstract service.
Figures
A caption giving the figure number and a brief description must be included below each figure. The caption should be understandable without reference to the text. It is preferable to place any key to symbols used in the artwork itself, not in the caption. Ensure that any symbols and abbreviations used in the text agree with those in the artwork.
Charts
Charts (groups of structures that do not show reactions) may have a brief caption describing their contents.
Tables
Each table must have a brief (one phrase or sentence) title that describes the contents. The title should be understandable without reference to the text. Details should be put in footnotes, not in the title. Tables should be used when the data cannot be presented clearly in the narrative, when many numbers must be presented, or when more meaningful inter-relationships can be conveyed by the tabular format. Tables should supplement, not duplicate, information presented in the text and figures. Tables should be simple and concise.
Schemes
Each scheme (sequences of reactions) may have a brief caption describing its contents.
Chemical Structures
Chemical structures should be produced with the use of a drawing program such as ChemDraw.
Cover Art
ACS Infectious Diseases authors are encouraged to submit images to be considered for use on the journal’s front cover or Supplementary Covers at the time of the submission of their revised manuscript. If your article is accepted for publication, your suggestion may also be selected for use on one of the journal’s covers. If your art is selected for front cover, ACS will send you information about how to request one complimentary 18” by 24” printed poster featuring your work. Images chosen for the front cover will be published at no cost to the author.
Cover image submissions should be colorful and visually engaging, with minimal text. The cover image should not resemble a graphical abstract or data figure, but rather should be an artistic and scientifically accurate representation of the manuscript.
Image files should be submitted as TIF, JPG, PNG, or EPS files (not PDF or PPT) with a resolution of at least 300 dpi for pixel-based images. Cover art should be 8.19 inches (20.8 cm) wide × 8.00 inches (20.3 cm) high at 300 ppi, and submission of “layered” artwork is encouraged. Authors should submit the cover image, along with a short (<50-word), clear legend explaining the image, as supplementary files to ACS Paragon Plus with their revised manuscript.
If you wish to be considered only for the front cover, and not a paid supplementary cover, please respond NO accordingly to the Supplementary Cover Art question in ACS Paragon Plus. For more information on the Supplementary Covers program, please see this webpage. All art submitted for consideration for a supplementary cover will also be considered for a front cover.
Web Enhanced Objects (WEO)
The Web editions of ACS journals allow readers to view multimedia attachments such as animations and movies that complement understanding of the research being reported.
WEOs should be uploaded in the submission system with ‘Web Enhanced Object’ selected as the file designation. Consult the list of compatible WEO formats.